Pool Cage Painting in Dade City, FL
We paint, rescreen and restore aluminum pool cages for homeowners throughout Dade City, from older Hudson Avenue area homes to newer construction near US-301.
- Free Written Estimate
- Fast Scheduling
- Built for Florida Weather
- Licensed & Insured
- Free Written Estimates
Request Your Free Estimate
Request a free written estimate for your Dade City pool cage.
- Free No-Obligation Estimate
- Fast Response Times
- No Pressure Consultation

Dade City sits inland on Florida’s Nature Coast, north of Tampa Bay in Pasco County, and that distance from the gulf doesn’t spare pool cages from trouble. Summer humidity, afternoon thunderstorms, and long stretches of direct sun still chalk out paint, pit screws, and loosen screen spline on enclosures across the city, from older homes near downtown to newer subdivisions off Clinton Avenue.
We have worked on cages across Dade City, handling everything from rust spots on vertical support beams to full repaints and re-screens after storm damage or years of sun exposure. Our process starts with an on-site inspection, followed by pressure washing, rust treatment, and a coating system built for aluminum, so the finish holds up against Florida weather rather than just covering it up.
Dade City Weather and Cage Wear

Dade City’s inland position does not mean mild conditions for aluminum. Summer temperatures hold in the 90s for weeks, and that sustained heat breaks down enamel paint faster than homeowners expect, leaving a chalky residue on rails and panels that rubs off on your hand when you touch them.
Afternoon thunderstorms roll through Pasco County almost daily in summer, and the cycle of rain followed by intense sun stresses fasteners and welds. We see this often in older cages near downtown Dade City, where decades of this pattern have loosened screws and allowed surface rust to start at joints and corner brackets.
Screens fare no better. UV exposure dries out spline, the rubber cord that holds screen fabric in its track, and it eventually cracks or shrinks. Combined with humidity that keeps enclosures damp longer after storms, this creates conditions where small tears spread quickly if not addressed.
Our Pool Cage Painting Process

Every project starts with a pressure wash to strip away chalking paint, algae, and airborne grit that settles on screens and frames between storms. This step also reveals the true condition of the aluminum, including any rust spots or corrosion hidden under old paint, before we decide on next steps.
Rusted screws and corroded fasteners are removed and replaced, and pitted metal is treated so rust does not bleed through the new finish. We then apply a primer formulated for aluminum, followed by a coating designed to hold up under direct sun and repeated rain, the same conditions that wear down patio enclosures across Dade City.
- Pressure washing to remove chalk, algae, and debris
- Rust treatment and fastener replacement where needed
- Aluminum primer and UV-resistant topcoat application
- Full screen inspection for torn panels or failing spline
- Rescreening or spline replacement when required
Timeline, Access, and HOA Rules

A typical pool cage repaint in Dade City runs 2 to 4 days depending on the size of the enclosure and whether screens need replacing along with the frame. Weather plays a real role here, since summer storms can push a project back a day or two if rain rolls through before paint has cured.
We need clear access to the pool area and the panels of the cage itself, so pets, furniture, and grills near the enclosure should be moved before we arrive. Most Dade City homes have gated side yards or pool decks reachable without entering the house, which keeps the work contained to the outdoor space.
Many Dade City neighborhoods, including communities off Clinton Avenue and the subdivisions near Hilltop and Lock Street, have HOA guidelines on exterior colors, including screen enclosures. We can provide a written color reference and spec sheet for HOA submission before work begins, so approval does not stall the schedule.
Mistakes That Shorten a Repaint’s Life
The most common failure we see is paint applied directly over chalky or dirty aluminum. Oxidized paint and pollen film prevent proper adhesion, so even a quality coating peels or flakes within a season or two if the surface was not pressure washed and dried first.
Skipping rust treatment on screws, hinges, and frame joints is another shortcut that costs homeowners later. Rust bleeds through fresh paint from underneath, leaving orange streaks that reappear within months no matter how many coats go on top.
Pool cages near Pasco County’s waterways and low-lying areas face more airborne moisture and salt drift than inland homes, which accelerates corrosion on fasteners if they are not sanded and spot-primed. Proper prep, not the paint brand, is what determines how long a repaint actually holds up.
Process and Timeline
- Inspect the cage frame, screens, and fasteners for rust, loose panels, or corrosion.
- Pressure wash the entire structure to remove chalking paint, algae, and grit.
- Treat and spot-prime any rusted screws, hinges, or frame joints before painting.
- Apply primer and two coats of exterior-grade aluminum paint by brush or sprayer depending on cage design.
- Replace any torn or worn screens if the homeowner has requested rescreening alongside painting.
- Do a final walkthrough to check coverage, color match, and HOA compliance if applicable.
Most Dade City pool cage painting projects take 2 to 4 days from start to finish, depending on size and weather.
Dade City Pool Cage Painting FAQ
How long does pool cage painting take for a typical Dade City home?
Most cages take two to four days from pressure washing through final coat, depending on size and the number of screen panels that need masking. Humidity and rain in the summer months can add a day or two since each coat needs time to cure before the next goes on.
Do you repair rusted screws and frame corrosion before painting?
Yes, corroded fasteners are replaced and any oxidized or pitted aluminum is treated before primer is applied. Painting over rust without addressing it first only hides the problem temporarily, and it will bleed through the new finish within a season.
Will my HOA in Dade City need to approve the paint color first?
Many Dade City communities have architectural guidelines that specify an approved color or require a submission before exterior work begins. We can provide color samples and spec sheets to make that approval process easier if your HOA requires one.
Can you match the existing color on an older aluminum cage?
In most cases yes, standard cage colors like bronze, white, and sandstone can be matched closely using our existing paint stock. If the frame has faded significantly from years of sun exposure, we will show you a sample on the actual structure before committing to the full job.
Do you replace torn screens at the same time as painting?
Yes, rescreening and painting are commonly done together since the frame is already being masked and prepped. Doing both at once also avoids scheduling a second crew visit later.
How soon after a storm can you assess damage to my pool enclosure?
We can typically schedule a visual inspection within a few days of a storm, depending on demand across Pasco County at the time. If the cage has structural bending or separated panels, it is worth getting that assessment before heavy rain returns.
Nearby Areas We Also Serve
Crews working in Dade City also take on cage painting and rescreening jobs throughout the surrounding Pasco County area and toward Tampa Bay. Port Richey, San Antonio, Tarpon Springs, Oldsmar, Lithia and Brooksville.
Statewide details, colors and the full process are on our main pool cage painting page.
Request a Dade City Estimate
Send a few photos of your pool cage along with the property address in Dade City, and we will put together a written estimate based on the frame size, condition, and screen count. Call (877) 851-8727 or use the form on this page to get started.
Last reviewed: October 28, 2026